Jabra Evolve 75e In-Ear Wireless Headphones User Manual (2024)

Questions? Click to Live Chat
Evolve 75e
User manual

Making Life Sound Better

© 2017 GN Audio A/S. All rights reserved. Jabra® is a trademark of GN Audio A/S. The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by GN Audio A/S is under license.

Made in China
MODEL: HSC070W/END040W

Declaration of Conformity can be found on www.jabra.com/CP/US/doc

Welcome

Thank you for using the Jabra Evolve 75e. We hope you will enjoy it!

Jabra Evolve 75e features

• UC certified microphone technology
• Active Noise Cancellation (ANC) to eliminate disturbances
• Integrated Busylight to prevent interruptions
• Power battery to fuel all-day use (up to 12 hours on a 2 hour charge)
• Dual-connectivity to two Bluetooth devices, enabling you to take calls and listen to music from the same earbuds
• Up to 30 meters / 100 feet of wireless range for true mobility
• Vibrating call alert to ensure you never miss a call
• Listen-in feature: Hear the conversations around you, at the touch of a button

Jabra Evolve 75e overview

Included accessories

*Requires Microsoft Teams headset variant

How to wear

Jabra Evolve 75e is designed to be worn around the neck.
For the optimal call experience, position the microphone as close to your mouth as possible.

Getting the correct fit

The earbuds are supplied with three EarGel and EarWing sizes: large, medium and small.

It is highly recommended to mix and match the different EarGel and EarWing sizes to find the best combination for your ear. The correct fit will feel tight and will seal out background noises.

Attaching the EarWings

To properly attach the EarWing, align the indent on the EarWing (as illustrated) with the ridge on the earbud, and stretch the EarWing over the earbud. It will fit perfectly in the groove when properly attached.

Using the magnetic earbuds

The earbuds are magnetic, and connect together for convenient cable and power management. When the earbuds are connected, your music will be paused or your call will be ended. Go to section 6.1. for more information.

How to charge

To charge the earbuds, connect a USB charging cable to the USB charging port on the neckband. It is recommended to charge the earbuds using the supplied Jabra charging cable, however it is possible to charge the earbuds using your smartphone charger.
It takes approx. 2 hours to fully charge the earbuds.

Note: Always clean and dry the USB charging port before charging the earbuds. It is recommended to recharge the earbuds at least once a month.

What the LEDs mean

How to connect

Power on/off

On: Hold the Multi-function button for 1 second. The LED will flash green, and the neckband will vibrate.
Off: Hold the Multi-function button for 3 seconds. The LED will flash red, and the neckband will vibrate.

Connecting to a computer (Bluetooth adapter)

1. Insert the Bluetooth adapter (Jabra Link 370) into your computer.
   
2. Hold (1 sec) the Multi-function button on the earbuds to power them on. The earbuds and the Bluetooth adapter are pre-paired and will automatically connect.
   

Connecting to a computer (USB cable)

1. Ensure the earbuds are powered on.
2. Plug the earbuds into a USB port on your computer using the supplied USB cable.

Pairing with a smartphone

1. Ensure the earbuds are powered off, and then hold (3 secs) the Multi-function button until the LED flashes blue and you hear an announcement in the earbuds.
   
2. Wear the earbuds and follow the voice-guided pairing instructions.

How to use

Calls & music

Calls & music

	Power on	Hold (1 sec) the Multi-function button
	Power off	Hold (3 sec) the Multi-function button
	Play/pause music	Hold (1 sec) the Multi-function button
	Answer/end call	Press the Multi-function button when not on a call
	Reject call	Double-tap the Multi-function button
	Open Microsoft Teams notification*	Press the Multi-function button

*Requires Microsoft Teams headset variant

	Answer/end call or play/pause music	Detach/attach the magnetic earbuds
	Adjust volume	Press the Volume up or Volume down button, when listening to music or on a call
	Next track	Hold (1 sec) the Volume up button
	Previous track	Hold (1 sec) the Volume down button
	Battery status	Press the Volume up or Volume down button, when not listening to music or on a call
	Busylight on/off	Press both the Volume up and Volume down buttons simultaneously
	Siri or Google Now	Press the Mute/Voice button, when not on a call
	Mute/un-mute microphone	Press the Mute/Voice button, when on a call
	Cycle between ANC and HearThrough modes	Press the Audio mode button
	Listen-in on/off	Hold (2 secs) the Audio mode button

Active Noise Cancellation (ANC)

The earbuds use Active Noise Cancellation (ANC) to eliminate outside disturbance, allowing you to fully focus. Press the Audio mode button to cycle through the available options.

HearThrough

HearThrough enables you to hear your surroundings without needing to remove the earbuds. Your music will not be muted.
Press the Audio mode button to cycle through the available options.

Listen-in

Listen-in enables you to engage in conversations without needing to remove the earbuds. Your music will be muted.
Hold (2 secs) the Audio mode button to activate Listen-in.

Voice guidance

Voice guidance are announcements intended to guide you or give earbud status updates (e.g. connection and battery status).

How to turn voice guidance On/Off
Voice guidance is enabled by default.
Voice Guidance On: Ensure the earbuds are powered on, and then hold the Mute/Voice button for 5 seconds.

Voice Guidance Off: Ensure the earbuds are powered on, and then hold the Mute/Voice button for 5 seconds.

Siri or Google Now

Phone voice commands enable you to speak to Siri or Google Now on your smartphone using your earbuds. For more information on using Siri or Google Now, please refer to your smartphone’s user manual.

Phone voice commands

Activate Siri or Google Now (phone dependent)

Press the Mute/Voice button, when not on a call

Multiple call handling

The earbuds can answer or reject calls when you are already on a call.

Multiple call handling

	End current call and answer incoming call	Press the Multi-function button
	Put current call on hold and answer incoming call	Hold (1 secs) the Multi-function button
	Switch between held call and active call	Hold (1 secs) the Multi-function button
	Reject incoming call, when on a call	Double-tap the Multi-function button

Busylight

The Busylight lets others know when you are busy or on a call.

Busylight

Busylight on/off

Press both theVolume down up and Volume down buttons simultaneously to turn the Busylight on/off

To disable (or re-enable) the Busylight function, hold both the Volume up and Volume down buttons simultaneously for 3 seconds.

Vibrate alert

The earbuds will vibrate whenever they are powered on/off, connected to your smartphone or computer, or whenever there is an incoming call.

How to reset

Resetting the earbuds clears the list of paired devices and all earbud settings.
After resetting, it is necessary to re-pair the earbuds to your smartphone or to your Bluetooth adapter (Jabra Link 370). Please note that Jabra Direct is required to re-pair the earbuds to the Bluetooth adapter.

Reset

Firmware update

Firmware updates improve performance, or add new functionality to Jabra devices.

1. Connect the Jabra Evolve 75e to a computer using the USB cable or Jabra Link 370.
2. Install Jabra Direct on your computer, or Suite for Mac on your Mac.
3. Use Jabra Direct or Suite for Mac to check for the latest firmware updates.

Support

FAQ

View the FAQs on Jabra.com/Evolve75e

How to care for your earbuds

• Always store the earbuds with the power off and safely protected.
• Avoid storage at extreme temperatures (above 50°C/122°F or below -10°C/14°F). This can shorten battery life and may affect the earbuds.
• Regularly clean the metal mesh on each earbud to avoid them becoming blocked.

jabra.com/evolve75e

Documents / Resources

References

• Jabra Evolve 75e | wireless office earbuds with noise cancellation
• User Manual